Filter
Top Products
14
Figure 6 - External Audio Input and PA Output.
You can connect two audio sources to the Program Inputs connector: one for each channel. Audio sources can be directly
connected with a user-supplied DB9M connector. (Refer to the program input connector specifications, located on page 20, for
connector pin-out.) However, a more convenient method is to use an XP-USPG Breakout Panel as shown. The XP-USPG also
interfaces the PA jack of the MS-2002 to a standard , 2-pin XLR audio cable. Note: The XP-USPG Breakout Panel can be rack
mounted using a BOP-1000 Rack Mount Plate.