Filter
Top Products
20
Specifications
General
Power Requirements:
AC Input: 100-240 VAC, 50/60 Hz
Channel Power: 24 VDC nominal (12 to 30 VDC), 65 to 150 mA
MS2002 is capable of supplying 2 amps overall
Dimensions: 1.75" (44.5 mm) high x 19" (483 mm) wide x 10.31" (261.9 mm) deep
Weight: approximately 4.5lb (2 kg)
Environmental Requirements:
Storage: -20°C to 80°C; 0% to 95% humidity, non-condensing
Operating: -15°C to 60°C; 0% to 95% humidity, non-condensing
Dynamic-mic Headset
Microphone: 50 to 200 ohm, dynamic (balanced or unbalanced)
Headphones: 150 to 600 ohm, monaural
Connector Type: XLR-4M
Pin 1 Microphone low
Pin 2 Microphone high
Pin 3 Headphone high
Pin 4 Headphone low
Panel Microphone Input
Microphone Type: Electret condenser
Power: Phantom (+5 VDC)
Nominal Level: -42 dBu
Maximum Level: -25 dBu
Connector Type: IKP12 (MCP-90 series, stereo plug connector)
Program Input
Input Level: 100mV maximum
Voltage Gain: 25 ±3 dB
Output Level (to intercom channel) :1.0 Vrms nominal, 2.3 Vrms max.
Input Impedance: 75 kohm
Common Mode Rejection: Greater than 50 dB
Connector Type: 9-pin female D-sub (DE9S)
Pin 1 Ground
Pin 2 Program 1 input low
Pin 3 Program 2 input low
Pin 4 NC
Pin 5 NC
Pin 6 Program 1 input high
Pin 7 Program 2 input high
Pin 8 NC
Pin 9 NC