Filter
Top Products
6
Installation
Unpacking
The package contains the following items. Contact the shipper or your Audiocom dealer immediately if anything is
damaged or missing. Detach and fill out the registration card and return it to Telex to properly register your
MS-2002.
ytQytQ
ytQ
ytQytQ noitpircseDnoitpircseD
noitpircseD
noitpircseDnoitpircseD
1noitatSrewoPdnanoitatSretsaM2002-SM
1draCnoitartsigeRdnaytnarraW
1launaMresU
2setalPecaFkcalB
WARNING
The following instructions are for use by qualified personnel only. To avoid electric shock, do not remove the
cover unless you are qualified to do so.
AVERTISSEMENT
Les instructions qui suivent s’adressent uniquement a un technicien qualifie. Pour evite des chocs
electriques, ne pas ouvrir le boitier, a moins d’y entre habilite.
Configuration Pre-check
Before connecting the MS-2002 make sure that it is properly configured for your intended usage. Figure 2 shows
the locations of the configuration switches. To access internal switches, remove three screws from the top cover and
three screws from the bottom portion of each side.