Filter
Top Products
P170/P170v SETUP
This section is a detailed description of the setup for your MagnaByte
®
P170/P170v. If you feel very comfortable with the set up of computer
hardware, you may want to use the Quick Setup section of this manual.
Positioning the P170/P170v On the Desktop
1. Place the MagnaByte
®
P170/P170v on a table or desktop as shown in
Figure 7.
NOTE: Ensure that the P170/P170v vents are not blocked. The
P170/P170v takes in cool air at the bottom of the projector. Hot air is
exhausted at the top of the P170/P170v.
2. To determine the distance between projector and screen, refer to Fig-
ure 8 and select the desired screen image size.
AUDIO
AUDIO
AUDIO
VIDEO
VIDEO
MONITOR
COMPUTER1
COMPUTER2
OUTPUT
SPARELAMP
ACVoltage: 115V,60 Hz
230V,50 Hz
SEE BOTTOM
FOR FUSE
REPLACEMENTAND
VOLTAGE SWITCH
VIDEO
VIDEO
LR
LR
S-VHS
TV2
TV1
WARNING:HOT
Allow unit to cool before
replacing lamp.Avoidtouching
bulb or inside of reflector.
Replace with FXL Lamp.
Figure 7.
Positioning the
P170/P170v on
the Desktop
☞
Projector Distance
From Screen
4 ft (1.2 m)
6 ft (1.8 m)
8 ft (2.4 m)
10 ft (3.0 m)
Image
Height
2.1 ft (0.6 m)
3.2 ft (1.0 m)
4.25 ft (1.3 m)
5.3 ft (1.6 m)
Image
Width
2.8 ft (0.9 m)
4.2 ft (1.3 m)
5.6 ft (1.7 m)
7.0 ft (2.1 m)
Figure 8.
Distance vs Image
8 User Manual