Filter
Top Products
4. Eject the lamp by pulling the ejection lever (Figure 15) on the lamp
holder toward the rear of the P170/P170v.
5. Return the ejection lever to its original, vertical position.
NOTE: Typically, lamps have an operating life of approximately 40
hours. When lit, the
REPLACE LAMP
LED indicates that the
P170/P170v has been in use for approximately 40 hours and lamp failure
may occur soon. At this time you may elect to replace the lamp or reset
the
LAMP HOURS
using the Menu Mode On-Screen control, or you may
elect to continue using your P170/P170v until the lamp fails.
6. Unscrew and open the spare lamp access door (Figure 15).
7. Remove the spare lamp from its storage location and insert it into the
lamp holder.
NOTE: Replace the spare lamp as soon as possible.
8. Close both the lamp access and spare lamp access doors (Figure 15).
AUDIO AUDIO AUDIO
VIDEO VIDEO MONITOR
COMPUTER 1 COMPUTER 2 OUTPUT
SEE BOTTOM
FOR FUSE
REPLACEMENT AND
VOLTAGE SWITCH
Spare Lamp
Lamp Compartment
Lamp
Original
Position
Eject
Position
WARNING:HOT
Allow unit to cool before
replacing lamp. Avoid touching
bulb or inside of reflector.
Replace with FXL Lamp.
USE ONLY WITH250V FUSE
Figure 15.
Lamp
Replacement
☞
22 User Manual