Filter
Top Products
Cleaning Platen
and Transport
Rollers
Step ➐
Using an Alcohol-moistened Swab, clean the
Card-Flip Rollers.
Cleaning Platen
and Transport
Rollers
Step ➑
Replace the Encoder Shroud (see Step 2), in-
stall, Ribbon, placecards inthe Input Tray, and
print some Test Cards. Inspect the cards for
Print Anomalies. If Anomalies appear, refer to
Appendix A, Troubleshooting.
Cleaning
Laminator Rollers
The Lamination head has two rollers—an up-
per heated roller and a lower pressure roller.
Cleaning
Laminator Rollers
Step ➊
Turn off power, open the cover, and unlatch
and raise the Laminator head. This is similar to
the Ribbon Loading described in Section 1.
980179-001 Rev. A 49
Operation
Figure 2-24
Card-Flip Rollers
Card-Flip
Rollers
Card-Flip
Rollers