Filter
Top Products
Stowaway Universal Bluetooth Keyboard Owner’s Manual Page 5
4. The New Connection window is used to connect
the Pocket PC device to the Stowaway BT
keyboard. Tap New Connection to begin the
process.
5. Before starting the scan
make sure the keyboard is
Discoverable by the Pocket
PC device. To do this, press
the <Ctrl> <Left Fn> <Right
Fn> keys together on the
keyboard until the green LED
flashes (~ 1 second). Then
tap the Scan button on the
screen.
6. Wait until the Stowaway BT Keyboard appears in
the list. If the keyboard does not show up:
a. Try pressing the <Ctrl> <Left Fn> <Right Fn>
keys together on the keyboard and tapping
the Scan button on the screen again.
b. Or, power cycle the keyboard (close and
reopen), then press <Ctrl> <Left Fn> <Right
Fn> and tap Scan again.
c. If neither of the above steps work, check that
the Red LED on the keyboard is not lit after a
power cycle indicating a dead battery
condition.