Filter
Top Products
SpeedTouch 210i
30
LAN-to-LAN Access
The following sections are based on the network layout above to describe how to set up a
LAN-to-LAN profile to connect two private networks. In the above network layout, the
private network of the head office is 192.168.1.0/24 and the off-site branch office
network is 192.168.2.0/24.
Before you begin to setup a LAN-to-LAN profile for each network, you should gather the
information shown in the following table.
Head Office Branch Office
Network ID 192.168.1.0/24 192.168.2.0/24
Router IP address/netmask 192.168.1/24 192.168.2.1/24
Assigned IP for dial-in
connection
192.168.1.200 192.168.2.200
Access Account UN: head; PW: head UN: branch; PW: branch
ISDN line number 1000 2000
Callback function Disable Disable
Activating the Remote Dial-In Capability
In the Quick Setup group of the Setup Main Menu, click Remote Dial-In
Access Setup to enter the setup page. See the Remote Dial-In Access section earlier in
this chapter for a full explanation of the fields on this page.
Head Office:
SpeedTouch 210i
SpeedTouch 210i SpeedTouch 210i