Filter
Top Products
SpeedTouch 210i
56
Management Access Control
♦ Allow management from the Internet – Check to allow system
administrators to login from the Internet. The default setting is "not allowed".
♦ Disable PING from the Internet – Check to prevent Ping capability from
the Internet.
Access List
You may specify that the system administrator can only login from a specific host or
network defined in the list. A maximum of three IPs/subnet masks may be entered.
♦ List IP – Specifies an IP address allowed to login to the router.
♦ Subnet Mask – Specifies a subnet mask allowed to login to the router.
Management Port Setup
♦ Default Ports – Check to use standard port numbers for the Telnet and HTTP
servers.
♦ User Defined Ports – Check and enter user-defined port numbers for the
Telnet and HTTP servers.
SNMP Setup
♦ Enable SNMP Agent – Check to enable SNMP agent and then fill out the
appropriate information for the Get Community, Set Community, Manager
Host IP, Trap Community, Notification Host IP, and a Trap Timeout.