Filter
Top Products
SpeedTouch 210i
47
The Following sections will explain more about IP Filter/Firewall Setup using Web
Configurator. The Filter has 12 filter sets with 7 filter rules for each set. There are a total of
84 filter rules for the IP Filter/Firewall Setup. By default, the Call Filter rules are defined
in filter set 1 and the Data Filter rules are defined in filter set 2.
♦ General Setup – Some general settings are in the setup link.
♦ Filter Setup – Here there are 12 filter sets for IP Filter configurations.
♦ Set to Factory Default – Click here to restore the filter rules to default values.
General Setup
On the General Setup page you can enable/disable the Call Filter or Data Filter and assign
a Start Filter Set for each, configure the log settings, and set the MAC address for
duplicate packets.