SpeedTouch 210i
42
As shown above, the Port Redirection Table provides 10 port-mapping entries for
internal hosts.
♦ Service Name – Specify the name for the specific network service.
♦ Protocol – Specify the transport layer protocol that supports TCP and UDP
options.
♦ Public Port – Specify which port should be redirected to the internal host.
♦ Private IP – Specify the private IP address of the internal host offering the
service.
♦ Private Port – Specify the private port number of the service offered by the
internal host.
♦ Active – Check here to activate the port-mapping entry.
DMZ Host Setup
Click DMZ Host Setup to open the setup page. The DMZ Host settings allow a defined
internal user to be exposed to the Internet to use some special-purpose applications such
as Netmeeting, Internet games, etc.
♦ DMZ Enable – Check to enable the DMZ Host function.
♦ DMZ Host IP – Enter the IP address of DMZ host.