Filter
Top Products
TOSHIBA
Tough Enough for Today’s World
LED BOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
SYSTEM BOARD REMOVAL
SYSTEM BOARD REMOVAL
3. Disconnect the DC-jack harness from PJ800 on the
system board.
4. Remove two hex screws and three M2.5x4 black
flat ehad screws securing the system board.
5. Remove the system board by lifting up from the front
side as shown above.
6. Disconnect the flexible cable and battery harness
from PJ3 and PJ810 on the system board.
1. Lift up the LED board to disconnect it from PJ310
on the system board.
1. Remove two M2.5x6 silver screws securing the
conn holder.
2. Lift out the conn holder.
CD-ROM
insulator
M2.5x6 silver screws
Conn holder
LED board
M2.5x4
black flat head
screws
Hex screws
DC-jack
harness
PJ800
System board
Battery harness
PJ810
PJ3
Flexible cable
Satellite
TM