Filter
Top Products
4. Lift out the keyboard and set it on the palm rest.
5. Disconnect the keyboard cable from PJ333 on the
system board and lift out the keyboard.
KEYBOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
TOSHIBA
Tough Enough for Today’s World
IPS SWITCH REMOVAL
IPS SWITCH REMOVAL
COOLING MODULE REMOVAL
PJ333
Keyboard
cable
Keyboard
1. Remove one M2.5x4 black flat head screw securing
the IPS switch cover(touchpad) from the battery
compartment.
2. Remove the IPS switch(touchpad) cover from the
palm rest.
3. Disconnect the IPS switch cable from PJ339 on the
system board and lift out the membrane switch assembly.
IPS switch cover
1. Remove four M2.5x6 black flat head screws
securing the heat sink plate.
2. Lift out the heat sink plate.
Heat sink plate
M2.5x6 black flat head screws
M2.5x4 black flat head screw
IPS switch
cable
Membrane
switch
assy
PJ339
Satellite
TM