Filter
Top Products
MODEM REMOVAL
1. Remove one M2.5x4 black flat head screw securing
the modem slot cover.
2. Insert the case separator into the notched side of the
cover and lift up to release the two latches securing
the left side of the modem slot cover.
TOSHIBA
Tough Enough for Today’s World
1. Open the display panel.
2. Remove the Keyboard holder at the top of the
keyboard.
3. Remove two M2.5x2.6 black screws securing the
keyboard.
KEYBOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
1800 Series
3. Remove the glass tape securing the RJ-11 jack cable.
4. Remove two M2x4 brass screws securing the
modem board.
5. Lift up the modem board to disconnect it from the
system board.
6. Remove the RJ-11 jack from the modem board.
Modem slot cover
M2.5x4 black flat head screw
M2x4 brass screws
Modem
RJ11 Jack
Latch
Keyboard holder
M2.5x2.6 black screws
Satellite
TM