Filter
Top Products
MEMORY MODULE REMOVAL
1. Turn the computer upside down.
2. Remove four M2.5x4 black screws securing the
memory cover.
3. Lift out the cover.
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
1900 Series
FDD REMOVAL
1. Remove one M2.5x4 black screw securing the FDD
assembly.
2. Disconnect the FDD cable from the system board.
3. Slide the FDD assembly to the right and lift it out.
4. Gently press out on the memory clips and pull the
memory module out of the connector on a 45 degree
angle.
Satellite
TM
FDD cable
M2.5x4 black screw
FDD assy
M2.5x4 black screws
Memory module
Memory clips
4. Remove two M2x3 black screws securing the
FDD bezel from the FDD and lift out the bezel.
5. Disconnect the FDD cable from the FDD.
M2x3 black screws
Bezel
FDD cable