Filter
Top Products
CD-R/W/DVD-ROM DRIVE REMOVAL
MINI PCI CARD REMOVAL
3. Remove two M2x3 black screws securing the
CD-R/W/DVD-ROM bracket and lift it out.
4. Remove three M2x3 black screws securing the
CD-R/W/DVD-ROM bezel and lift it out.
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
1900 Series
2. Gently press out the Mini PCI slot clips and pull the
Mini PCI card out of the connector on a 30 degree
angle.
1. Remove one M2.5x4 black screws securing the
DVD-ROM drive.
2. Slide the DVD-ROM drive to the left to disconnect it from
PJ23 on the system board.
Satellite
TM
1. Remove one M2.5x4 black torx screws securing
the Mini PCI slot cover.
Mini PCI card
PCI clips
DVD-ROM drive
M2.5x4
black screw
M2.5x4 black torx screws
Mini PCI slot cover
Bezel
Bracket
M2x3 black screws
M2x3 black screws