Filter
Top Products
M2.5x4 black screws
Left/Right
speaker
cable
Power button
Power switch board
FIELD REPLACEABLE UNIT DOCUMENTATION
1900 Series
Satellite
TM
TOP COVER REMOVAL
TOP COVER REMOVAL
LCD/FL cable M2.5x4 black screw
Speaker cover
M2.5x7 black screws
10. Remove the mylar tape and disconnect the FDD interface
cable from JP11 on the system board.
11. Disconnect touchpad interface cable from JP10 on the
system board.
12. Remove nine M2.5x7 black screws securing the top cover.
13. Using the case separator, separate the top cover from the
bottom cover
4. Slide the LCD/FL harness cover to the right and lift it out.
5. Remove two M2.5x5 silver screws securing the power
button and the power switch board.
6. Lift out the power button and the power switch board.
7. Remove two M2.5x4 black screws securing the
speaker cover and lift out the cover.
8. Remove one M2.5x4 black screw securing the
LCD/FL cable bracket. Remove the bracket and
Disconnect the LCD/FL cable from JP1.
9. Disconnect the Left/Right speaker cable from JP7
and JP9 on the system board.
1. Remove two M2.5x4 black screws securing the
system board.
2. Push the PC card slot buttons in or gently spread the
bottom plastic close to the PC card slot and lift out
the system as shown above.
SYSTEM BOARD REMOVAL
TOSHIBA
Tough Enough for Today’s World
FDD interface
cable
JP11
Touchpad
interface
cable
JP10
System board
PC card slot buttons
M2.5x5 silver screws
LCD/FL
harness
cover
M2.5x4 black screws