Filter
Top Products
8 Remote Scan
118 Installing Remote Scan Driver
Installing Remote Scan Driver
This section describes how to install the Remote Scan driver.
Planning for Installation
This equipment provides a Remote Scan driver that allows users to operate scanning remotely
from a Windows computer and import the scanned images into a TWAIN-compliant application.
The Remote Scan driver can connect to this equipment over a TCP/IP network.
System Requirements
The Remote Scan driver is available for following environments:
y OS
Windows 2000 Service Pack 4
Windows XP Service Pack 1/Service Pack 2
Windows Vista
Windows Server 2003
y Required Software
TWAIN-compliant application
Microsoft Internet Explorer 5.5 Service Pack 2 or later (when IPv4 is used)
Microsoft Internet Explorer 7.0 or later (when IPv6 is used)
y Recommended memories
Scanning of the document in the black mode: 256 MB
Installing the Remote Scan Driver
You can install the Remote Scan driver from the Client Utilities CD-ROM or TopAccess.
Installing from Client Utilities CD-ROM
This section describes how to install the Remote Scan driver.
Installing the Remote Scan driver using the installer
This procedure describes an installation on Windows XP. The procedure is the same when
other versions of Windows are used.
Connecting over TCP/IP Network
Remotely operate scanning
using Remote Scan driver
Retrieve scanned images
into an application
Originals
Windows 2000
Windows XP
Windows Vista
Windows Server 2003