Filter
Top Products
Changing Sizes in Horizontal and Vertical Directions - XY ZOOM - 111
Changing Sizes in Horizontal and Vertical Directions - XY ZOOM -
You can select each reproduction ratio of the horizontal (X) and vertical (Y) directions separately.
1
Place paper in the drawer.
2
Place the original.
3
Select “XY ZOOM” in the copy menu, and then press the [ENTER]
button.
4
Press the selecting button (Center: – or Right: +) to set the desired
reproduction ratio.
One press of each button increases or decreases the reproduction ratio by 1%. When
you keep pressing either or them, the reproduction ratio also keeps changing. The
reproduction ratio can be set from 25% to 200%.
The direction can be switched with the selecting button (Left: X/Y).
5
Press the [ENTER] button.
The reproduction ratios are set.
6
Press the [CANCEL] button.
The screen returns to the “copy mode” main screen.
Y
X
X
Y
PAPER TYPE
JOB BUILD
EDGE ERASE
ANNOTATION
IMAGE SHIFT
DUAL PAGE
FINISHING DUPLEX
JOB MEMORY
XY ZOOM
ID CARD
2IN1/4IN1
XY ZOOM
X:120% Y: 80%
+-X/Y
25% ---- 200%