Toshiba 225 All in One Printer User Manual


 
1 PREPARATION
42 Preparation 2 - Placing Copy Paper
4
Place paper in the drawer.
y The maximum number of sheets that can be placed at one time is 250 (64 to 80
g/m
2
). Be sure that the stack height of paper is not higher than the line indicated at
the inner side of the side guide and trailing guide.
P.39 “Acceptable media types”
y Fan the paper well before placing it in the drawer, otherwise multiple feeding could
occur. Be careful that the paper does not cut your fingers.
y Place the paper face up. You may tell its “face” by the note on its wrapping paper.
y Do not allow any gap between the paper and the right side wall in the drawer.
When placing LD size paper
To place LD size paper in the drawer, the end guide needs to be removed. Move it to
the left end while pushing its lower part from both sides, and then pull it upward. Keep
it in the pocket on the front side of the drawer.
3
2
1