Toshiba 230 Printer User Manual


 
196 Printing Guide — Installing Client Software for UNIX
For e-STUDIO4511 Series:
cp TOSHIBA_EST4511_CUPS.gz /usr/share/cups/model/
For e-STUDIO450 Series:
cp TOSHIBA_EST450_CUPS.gz /usr/share/cups/model/
For e-STUDIO280 Series:
cp TOSHIBA_EST280_CUPS.gz /usr/share/cups/model/
4. Enter the following command:
service lpd stop
When using the Red Hat Linux, continue to the next step.
When using other than the Red Hat Linux, skip to step 8.
5. When using the Red Hat Linux, enter the following command:
/usr/bin/redhat-switch-printer
The redhat-switch-printer dialog box appears.
6. Select “CUPS” and click [OK].
The information dialog box appears.
7. Click [OK].
8. Enter the following command:
service cups start
9. Enter the following command:
/usr/bin/cupsconfig
The Common UNIX Printing System page appears.
10. Click the “Manage Printers” link.
The Printer page is displayed.
11. Click [Add Printer].
The Prompt dialog box appers.
12. Enter the user name and password that has the Super User
privilege, and click [OK].
The Admin page is displayed.
13. Enter the printer name in the “Name” field and click [Con-
tinue].
14. Select “Internet Printing Protocol (http)” at the “Device” drop
down box and click [Continue].
15. Enter the IPP URL address (http://<IP address>:631/Print) for
the equipment in the “Device URL” field and click [Continue].
16. Select “TOSHIBA” at the “Make” drop down box and click
[Continue].