A SERVICE OF

logo

Open as PDF
next previous
10 WHEN THIS MESSAGE APPEARS
378 “Check paper size setting on control panel for drawer N”
5
Place paper on the bypass tray and select the paper size.
P.89 “Bypass Copying”
6
Place the original and try to copy again.
When “POWER FAILURE” appears, press the [FUNCTION CLEAR] button twice to clear
the message. See P.372 ““POWER FAILURE”” for details.
During printing from the FAX or Printer (using a drawer)
2
Remove the jammed paper.
P.324 “Jam Symbols”
1
Turn the power of the equip-
ment OFF.
You cannot shut down the equipment.
3
Pull out the drawer mentioned
in the message. Then remove
all the paper in it.
4
Close the drawer and then turn
the power ON.