Toshiba 431A Power Supply User Manual


 
9
4300 Series Ancillary Cabinets Installation and Operation Manual
4.5 Inspection/Storage
Inspection
Upon receipt of the ancillary cabinet, an inspection for shipping damage should be performed. Use caution
when removing the unit from the pallet. Refer to labels or documentation attached to packing material.
Unpacking
Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipping,
keep all original crating and packing materials for return to the shipping agent.
NOTE: The factory warranty does not apply to damage incurred during shipping!
Ensurethattheratedcapacityandthemodelnumberspeciedonthenameplateconformtotheorder
specications.
Storage
During periods of non-use, the following guidelines are recommended for storage.
Storage Preparation
1) The 431B battery cabinet should be charged for 24 hours to fully charge the batteries.
2) Stop the battery charger.
3) Place both 431B Main Circuit Breaker switches in the “OFF” position.
Storage Conditions
•Forbestresults, storetheancillary cabinetinthe originalshippingcontainer and
place on a wood or metal pallet
•Storagetemperaturerange:32to104°F(0to40°C)
•Theoptimumstoragetemperatureis70°F(21°C).Ahigherambienttemperaturewill
require recharging batteries more frequently during storage
Avoid the following storage locations:
•Locationsthataresubjecttoextremetemperaturechangesorhighhumidity
•Locationsthataresubjecttohighlevelsofdustormetalparticles
•Locationsthataresubjecttoexcessivevibration
•Inclinedoorsurfaces