Toshiba 6520C All in One Printer User Manual


 
1 BEFORE USING EQUIPMENT
12 Placing Paper
*1 Use the bypass tray when you want to make a copy on the back side of copied Thick 1, Thick 2 or Thick 3 paper.
*2 When duplex copying is applied to THICK 4, streaks may appear on the front side of printouts. These streaks may appear clearly when the
copied image is dark or when the density level of the entire image is even.
*3 Automatic duplex copying is not available.
*4 For making copies on the sticker labels, select “THICK 2” for the paper type.
*5 For duplex copying, use paper available for duplex copying.
*6 To copy on the back side of copied waterproof paper (SPECIAL 1 is specified for the paper type), place the sheets one by one on the bypass
tray.
*7 When making copies on waterproof paper (SPECIAL 1 is specified for the paper type), after about 10 sheets have exited, remove copied
sheets from the receiving tray or the tray of the optional finisher.
*8 If an optional finisher has been installed, the upper receiving tray of the finisher and the receiving tray of the equipment are available for paper
exiting.
*9 Note that black streaks may appear on the edge of the printed sheets.
y “LT format” is the standard size only for use in North America.
y “K format” is a Chinese standard size.
y Abbreviations for paper sizes: LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer, SQ: Square
Unacceptable copy paper
Do not use the types of paper shown below. This could cause a paper jam.
y Damp paper
y Folded paper
y Curled or creased paper
y Paper whose surface is extremely smooth or rough
Do not use the types of paper shown below. This could cause an equipment malfunction.
y Paper whose surface has had a special treatment
y Paper once printed with other copiers or printers
Precautions for storing copy paper
Make sure of the following when storing copy paper:
y Wrap the paper in its wrapping to keep it free from dust.
y Avoid direct sunlight.
y Store in a damp-free space.
y To prevent paper from being folded or bent, store it in a flat place.
Bypass tray Plain paper, recycled
paper
(64 - 105 g/m
2
)
(17 - 28 lb. Bond)
100 sheets (64 - 80 g/m
2
) (17
- 20 lb. Bond)
80 sheets (81 - 105 g/m
2
) (21
- 28 lb. Bond)
A/B format:
A3, A4, A4-R, A5-R, A6-R, B4, B5, B5-R, FOLIO, 305 mm x
457 mm, 320 mm x 450 mm
*8
, 320 mm x 460 mm
*8
, 330
mm x 483 mm
*8, *9
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5"SQ, 12" x 18",
13" x 19"
*8, *9
K format:
8K, 16K, 16K-R
Non-standard size:
Length: 100 - 297 mm (3.9" - 11.7"),
Width: 148 - 432 mm (5.8" - 17")
THICK 1
(- 163 g/m
2
)
(- 90 lb. Index)
40 sheets
THICK 2
(- 209 g/m
2
)
(- 110 lb. Index)
30 sheets
THICK 3
(- 256 g/m
2
)
(- 140 lb. Index)
30 sheets
THICK 4
*2, *3
(- 300 g/m
2
)
(- 110 lb. Cover)
30 sheets
Sticker labels
*3, *4
Waterproof paper
*5
(- 230 g/m
2
)
30 sheets
*6, *7
OHP film
*3
30 sheets A4, LT
Feeder Paper type Maximum sheet capacity Size