Filter
Top Products
2 HOW TO MAKE COPIES
Placing Originals 27
Placing Originals
Acceptable originals
When the RADF (Reversing Automatic Document Feeder) is used, 2-sided originals can be automatically scanned one
sheet after another. When the original glass is used, originals such as OHP films, tracing paper, booklet or 3-dimensional
objects, that cannot be placed on the RADF can be scanned, as well as plain paper.
*1 You may not obtain enough image quality when an original with a paper weight of more than 157 g/m
2
(41.8 lb.) is used.
y Automatic size detection does not work properly when A/B format originals are used in equipment for North
America. It does not work properly when LT format originals are used in equipment other than that for North
America.
y Automatic size detection does not work properly when K format paper is used for printing. (K format is a standard
paper size in China.)
y Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
y Be sure to place ST-size or A5-size originals in a landscape direction when using the RADF.
Maximum number of sheets for one scanning
A maximum of 1000 sheets can be scanned per 1 copy job or up until the embedded memory becomes full. When the
number of scanned sheets has exceeded the above limit, this equipment stops scanning and the message below appears.
If you want to print out the data scanned up until then, press [YES]. If you want to delete them, press [NO].
Location Maximum size Paper weight
Acceptable sizes for automatic
size detection
Original glass
Length: 297 mm (11.69")
Width: 432 mm (17.01")
—
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R
North America: LD, LG, LT, LT-R,
ST-R
RADF
1-sided originals: 35 - 209 g/m
2
(9.3 - 110 lb.)
*1
2-sided originals: 50 - 157 g/m
2
(13.3 - 41.8 lb.)
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R, FOLIO
North America: LD, LG, LT, LT-R,
ST-R, COMP