Filter
Top Products
121
Mobile Computing
Monitoring battery power
5.375 x 8.375 ver 2.3
It is seldom necessary to charge the RTC battery because
it charges while the computer is on. If the RTC battery is
low, the real-time clock and calendar may display the
incorrect time and date or stop working.
When Hibernation mode is enabled and the RTC battery
is completely discharged, a warning prompts you to
reset the real-time clock.
The computer can be used while the RTC battery is being
charged, although the charging status of the RTC battery
cannot be monitored.
Monitoring battery power
The battery light indicates the battery’s current charge. The
indicator light:
❖ Glows green when the battery is fully charged
❖ Glows amber while the battery is being charged
❖ Does not glow if the external power source is
disconnected or if the battery is completely discharged
Determining remaining battery power
Wait at least 16 seconds after turning on the computer before
trying to monitor the remaining battery power. The computer
needs this time to check the battery’s remaining capacity and
perform its calculations.
You can monitor the battery’s remaining charge. The
computer calculates the remaining battery charge as it
operates, based on your current rate of power use.
To show remaining power:
NOTE
NOTE