Filter
Top Products
66
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
Removing a memory module
If you use the computer for a long time, the memory module
will become hot. If this happens, let the module cool to room
temperature before you replace it.
Do not try to remove a memory module with the computer
turned on. You can damage the computer and the device.
Do not remove the memory module while the computer is in
Standby mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the
above cases, the Standby configuration will not be saved.
The following message appears when you turn on the power:
Warning: Resume Failure
Press Any Key To Continue
If the computer hangs up when you turn it on, perform the
following: Press the power button and hold it down for five
seconds until the power turns off, then turn the power on
again.
1 Follow steps 1 through 3 in “Installing additional
memory (optional)” on page 62.