Filter
Top Products
AR-B1375/AR-B1376 User s Guide
0-4
0.6 ORGANIZATION
This information for users covers the following topics (see the Table of Contents for a detailed listing):
z Chapter 1, “Overview,” provides an overview of the system features and packing list.
z Chapter 2, “System Controller,” describes the major structure.
z Chapter 3, “Setting Up the System,” describes how to adjust the jumper, and the connectors setting.
z Chapter 4, “CRT/LCD Flat Panel Display”, describes the configuration and installation procedure using
LCD and CRT display.
z Chapter 5, “Installation,” describes the utility diskette using, solid-state disk’s writing protect function, and
the watchdog timer.
z Chapter 6, “Solid State Disk,” describes the various type SSD’s installation steps.
z Chapter 7, “BIOS Console,” providing the BIOS options setting.
z Chapter 8, Specifications & SSD Types Supported
z Chapter 9, Using Memory Banks
z Chapter 10, Placement & Dimensions
z Chapter 11, Programming RS-485 & Index
0.7 STATIC ELECTRICITY PRECAUTIONS
Before removing the board from its anti-static bag, read this section about static electricity precautions.
Static electricity is a constant danger to computer systems. The charge that can build up in your body may be
more than sufficient to damage integrated circuits on any PC board. It is, therefore, important to observe basic
precautions whenever you use or handle computer components. Although areas with humid climates are much
less prone to static build-up, it is always best to safeguard against accidents may result in expensive repairs. The
following measures should generally be sufficient to protect your equipment from static discharge:
• Touch a grounded metal object to discharge the static electricity in your body (or ideally, wear a grounded
wrist strap).
• When unpacking and handling the board or other system component, place all materials on an antic static
surface.
• Be careful not to touch the components on the board, especially the “golden finger” connectors on the bottom
of every board.