Filter
Top Products
E11-4
ENGLISH VERSION EO1-33005
11. GENERAL MAINTENANCE
11.3 REMOVING JAMMED PAPER
2. Fit the enclosed Allen Key into the right side of the cutter unit to rotate the cutter manually. Remove
the jammed paper and any paper particles from the cutter.
3. Clean the cutter with dry cloth.
Fig. 11-6
4. Assembling is reverse order of removal.
Cutter
Allen Key
■ Cleaning the Strip Unit
1. First push the strip lever toward the printer to release the hook, and then pull the strip lever.
2. Remove the jammed paper, if any.
3. Clean the strip guide rollers A and B with a cloth moistened with alcohol.
WARNING!
1. Be sure to disconnect the power cord before cleaning the strip unit.
2. Do not touch the moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into
the moving parts, push the switch in the "OFF" position to stop movement.
Fig. 11-7
Strip Lever
Strip Guide Roller B
Strip Guide Roller A