Filter
Top Products
The PSAdmin Utility for Windows-based
3 3 - 3
Wizard
Wizard is a configuration program that can assist you in setting up the necessary parameters for your print
server device to function. Setup a print server by using Wizard.
TCP/IP Wizard
1. Click Wizard button just like a picture .and select TCP/IP Wizard.
2 Select “Obtain an IP address from DHCP server”. If there is a DHCP server on your network. This
option allows the print server to obtain IP-related settings automatically from your DHCP server. This
setting, by default, is disabled. If you would like to manually specify an IP address to the device, please
skip to the following step.
3 In the IP Address option, type an IP address for the print server. The IP address must meet the IP
addressing requirements of the network segment.
4 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently
configured to use.
5 (Optional) In the Gateway field, type the IP address of gateway.
6 When done, click OK button. The program will save the above settings into the print server.
7 Done
NetWare Wizard
1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent.
2. Click Wizard button just like a picture
.and select NetWare Wizard, as follow picture.