Filter
Top Products
The PSAdmin Utility for Windows-based
7 3 - 7
Upgrade
Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the
steps as follows:
1. Click Upgrade button just like a picture
, as shown as follow picture
2. Select General Upgrade. Make sure that the upgrade file is located in the same directory as PSAdmin.
The upgrade filename is mps13.bin.
Reset
1. Click Reset button just like a picture .
2. Reset allows the user to reset the print server device in order to establish a new connection or for new
settings to take effect.
Refresh
1. Click Reset button just like a picture .
2. Refresh searches the network for all attached print server(s).
Note: Configure the print speed in the Advanced label, must match the printer’s speed which connect to the
print server. Undependable configuration will cause printer to abnormal printing.