Filter
Top Products
Configuration from Embedded Web Server
12 5 - 12
Users can set up print server’s SNMP functions by using their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
SNMP Community: The print server supports up to two community names. The default community name is
public (case-sensitive), with Read Only access right in default.
Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP
WebJetAdmin.
SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the network
administrator, if the community name within a SNMP request is not correct.
AppleTalk Setup
The print server can print jobs submitted from Macintosh workstations connected to an Ethernet using
AppleTalk protocol. The basic configuration is for the print server in an AppleTalk environment is performed
simply by opening the Chooser window and selecting a printer that is connected to the print server.
1. Click Setup, it appears the sub-menu.
2. Click AppleTalk, it as shown in the following picture.
3. Zone Name: In this option, type an AppleTalk Zone name that you want the print server to belong to or leave
it in default (This enables the print server automatically search and link itself to the default zone that is set on
the AppleTalk router, if found). We also assume that at least an AppleTalk Zone exists on the network. If no
any zone exists, the print server itself displays the zone name as an asterisk (*) in the current AppleTalk
Status of the print server in the web browser.
4. Port Name: In this option, type a name for identification purpose or just leave it in default (recommended).
Note: The default print server’s Chooser name is as shown as follows:
<ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the device’s Node ID. For
example: ATALK_PS-40EEED-1. You may also change the <ATALK_PS> to a name you like for
identification purpose in this option. The print server will append the last six digits to the name you specify.
5. Printer Type: In this option, the LaserWriter of printer type by default (recommended).
6. Data Format: In this option, data format includes ASCII, TBCP and BCP.