Filter
Top Products
Troubleshooting
4 9 - 4
Print Server Reconfiguration Procedure on Windows NT
1. Click Start on the bottom left hand corner of the screen.
2. Select Settings and select Printers.
3. Select your printer connected to the print server, and right-click the printer icon. Select Properties.
4. Click Ports tab.
5. Click Configure Port. The print server will be shown on the next screen.
6. Find your original print server according to its Port Name or other distinguished name and click this print
server.
7. Click OK and it returns to the printer’s Properties page.
8. Click OK.
9. Done!
Moving Your Computer to A New Segment
If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me computer and
your computer is going to be moved onto another segment, you have to reconfigure the print server on your
computer to use your print server. However, this situation is like moving the print server to a new segment.
Please refer to the “Moving the print server to a new segment” section for more detailed reconfiguration
instructions.
Novell NetWare Troubleshooting
Many printing problems can be traced back to incorrect or incomplete print server installations. It is always wise
to check the installation configurations first.
In some cases, if necessary, delete the print server, print queue(s) or other setting(s). Next recreate the
necessary parameters or reconfigure the print server by running the PSAdmin.