Toshiba B-SX4T Printer User Manual


 
2. SUPPLY SPECIFICATIONS EO10-33013B
2.2 RIBBON
2- 4
2.2 RIBBON
No. Item Specification
1 Shape Spool type
B-SX4T 41 to 112 mm
2 Width
B-SX5T 41 to 134 mm
3 Max. length 600 m
4 Max. OD ø 90 mm
5 Back treatment Coated
Material Cardboard 6 Core
Shape See the following figures.
7 Leader tape
Polyester film (Opaque), 300 ± 5 mm long
8 End tape
Polyester film (Opaque), 250 ± 5 mm long
9 Winding method The ink side faces outside of ribbon winding
NOTES: 1. To ensure print quality and print head life use only TOSHIBA TEC specified ribbons.
2. To avoid ribbon wrinkles use a ribbon which is wider than the media by 5 mm or more.
However, too much difference in width between the two may cause wrinkles.
3. When using a 112 mm wide media, be sure to use a 108 mm wide ribbon. Use of other
ribbons may cause ribbon wrinkles.
4. When using a 134 mm wide media, be sure to use a 130 mm wide ribbon. Use of other
ribbons may cause ribbon wrinkles.
[B-SX4T]
Ribbon width 41 mm 50 mm 68 mm 84 mm 112 mm
(NOTE 3)
Proper media width 30 to 36 mm 36 to 45 mm 45 to 63mm 63 to 79 mm 71 to 112mm
[B-SX5T]
Ribbon width 41 mm 50 mm 68 mm 102 mm 134 mm
(NOTE 4)
Proper media width 30 to 36 mm 36 to 45 mm 45 to 63mm 63 to 97 mm 97 to 140 mm
NOTE: When purchasing ribbon locally, they must meet the above size. There may be TOSHIBA TEC-
approved ribbons which do not fall within the above size, however, they have no functional problem.
25.7 ±0.2 mm
B-SX4T: 41 – 112 mm
B-SX5T: 41 – 134 mm