Toshiba B-SX4T Printer User Manual


 
3. OPTIONAL KIT EO10-33013B
(Revision Date: Feb. 15,2007)
3.9 RFID MODULE: B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R
3- 4
3.9 RFID MODULE: B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R
Installing this module enables the printer to write data on an RFID tag as well as to print on the surface
of RFID supplies.
The three RFID module types are different from each other in frequency band and applicable countries.
NOTE:
1) Non-RoHS type
An RFID module can be installed on an RFID-ready B-SX4T or B-SX5T printer only.
(Serial No. 2604Wxxxxxx or later)
Also, an RFID module is supported by firmware version V3.1 or greater (Main program) and V1.1A or V2.0A
(Boot program).
2) RoHS type
An RFID module can be installed on the B-SX4T-GS20-QM-R or B-SX5T-TS22-QM-R.
Also, an RFID module is supported by firmware version V4.1 or greater (Main program) and V1.1A or V2.0A
(Boot program).
Specification
Item B-9704-RFID-U1-US B-9704-RFID-U1-EU/U1-EU-R B-9704-RFID-H1-QM/H1-QM-R
RFID module
to be used
AWID
MPR-1510A-RM
U1-EU model
AWID MPR-1580A-RM
U1-EU-R model
AWID MPR-1510 RM- V2.6HR1-
EU
TagSys
MEDIO S002
* An RFID module is not included
in this model when shipped from
the factory. (Note 3)
Frequency
band
UHF (902 to 928MH)
FH-SS (Frequency
Hopping Spectrum
Spread)
UHF (869.525MHz)
HF (13.56MHz)
Applicable
countries
U.S.A and Canada Austria, Belgium, Cyprus, Czech, Denmark, Estonia, Germany,
Greece, Finland, France, Hungary, Ireland, Italy, Latvia, Lithuania,
Luxemburg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain,
Sweden, the Netherlands, and U.K.
Available RFID
tags
EPC Class 0 (Read only)
EPC Class 1
ISO 18000-6B
EPC Class 1 Gen 2
TAGSYS C210
TAGSYS C220
TAGSYS C240
I-Code
Tag-It
ISO 15693
Output power 500mW 500mW 200mW