Filter
Top Products
4. MAINTENANCE ENGLISH VERSION EO1-33059
4.1 Cleaning
E4- 2
4.1.1 Print Head/Platen/
Sensors (Cont.)
4.1.2 Covers and Panels
6. Clean the Print Head Element with a Print Head Cleaner or a cotton
swab or soft cloth slightly moistened with alcohol.
7. Wipe the Platen, Feed Roller, and Pinch Roller with a soft cloth
slightly moistened with alcohol. Remove dust or foreign substances
from the internal part of the printer.
8. Wipe the Feed Gap Sensor and Black Mark Sensor with a dry soft
cloth.
Wipe the covers and panels with a dry soft cloth or a cloth slightly
moistened with mild detergent solution.
CAUTION!
1. DO NOT POUR WATER
directly onto the printer.
2. DO NOT APPLY cleaner
or detergent directly onto
any cover or panel.
3. NEVER USE THINNER
OR OTHER VOLATILE
SOLVENT on the plastic
covers.
4. DO NOT clean the panel,
covers, or the supply
window with alcohol as it
may cause them to
discolour, loose their
shape or develop
structural weakness.
NOTE:
P
lease purchase the Print Head
Cleaner (P/No. 24089500013)
f
rom your authorised TOSHIBA
TEC service representative.
Print Head
Element
Print Head
Feed Roller
Platen
Pinch Roller
Black Mark Sensor/
Feed Ga
p
Sensor