Filter
Top Products
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33059
7.1 Media
E7- 1
7. SUPPLY SPECIFICATIONS
7.1 Media
Please make sure that the media being used is approved by TOSHIBA TEC. The warranty does not apply when a
problem is caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service
representative.
7.1.1 Media Type
Two types of media can be loaded for this thermal transfer and direct thermal printer: label or tag. The table
below shows size and shape of the media available for this printer.
[Unit: mm]
Cut mode
Label dispensing mode
Item
Batch mode Strip mode
Rotary cutter Swing cutter
Label 10.0 – 1500.0 25.4 – 1500.0
38.0 - 1500.0
38.0 – 1500.0
c Media pitch
Tag 10.0 – 1500.0 ----
3”/sec., 5”/sec.: 30.0 – 1500.0
8”/sec.: 38.0 – 1500.0
25.4 – 1500.0
d Label length 8.0 – 1498.0 23.4 – 1498.0
25.0 – 1494.0
25.0 – 1494.0(*1)
e Width including backing paper
(See NOTE 5.)
30.0 – 140.0 50.0 – 140.0 30.0 – 112.0 30.0 – 140.0
f Label width (See NOTE 5.) 27.0 – 137.0 47.0 – 137.0 27.0 – 109.0 27.0 – 137.0
g Gap length 2.0 – 20.0 6.0 – 20.0
h Black mark length (Tag paper) 2.0 – 10.0
i Effective print width 10.0 – 128.0
Label 6.0 – 1496.0 21.4 – 1496.0
23.0 - 1492.0
23.0 – 1492.0
j Effective print length
Tag 8.0 – 1498.0
----
3”/sec., 5”/sec.: 28.0 – 1496.0
8”/sec.: 36.0 – 1496.0
23.0 – 1496.0
k Print speed up/slow down area 1.0
Label 0.13 – 0.17
Thickness
Tag 0.15 – 0.29
Maximum effective length for on the fly issue 749.0
Maximum outer roll diameter Ø200
Roll direction Inside
Inner core diameter Ø76.2±0.3
Label Tag paper
Cut position
Cut position
Stop
position
Stop
position
Feed Direction
Black Mark
(on reverse side)
Black Mark
(on reverse side) Refer to
NOTE 3 below.
h
e
c
e
g
h
c
d
i
i
k
k
f
j