Filter
Top Products
New Check Prompts Chapter 3 - Guest Check Functions
3-4 FS-3700 R4 Owner’s Manual
3.2 New Check Prompts
All checks are tracked by a system-assigned check number. In addition, other check
information can be required and attached to the check. These options are table
number, number of guests, order/tent number, and select customer.
3.2.1 Table Number
A table number can be required for the Order Type by the REQ TABLE flag in the
Order Type Setup. The Order Type of the check is determined by the Job Code
of the Employee logged in.
This setting requires a Table number entry before the check is sent.
A Table number is not required if immediately paying out the check.
An additional setting, PROMPT TABLE in Station Setup, can require a
Table number entry before a menu item is entered.
With this option set, the table number entry is required if immediately
paying out the check.
A table number cannot be assigned to a check unless REQ TABLE is yes.
When a table number is assigned to a check, it can be recalled by table number
as well as the check number.
Table Select Preset Key
Table numbers can be assigned to checks with a [TABLE SELECT] key.
Table numbers are pre-assigned to the key and are usually arranged on a
screen to represent the layout of the restaurant.
Order type set to require and prompt for Table #
1. Start the check.
2. Screen prompts for the table #.
Index the table # and press ENTER on the keypad.
Order Type set to require Table #
1. Start the check.
2. Index the table number and press [TABLE].
OR
3.
Enter items.
4. Send the check.
5. Screen prompts for the table #