Filter
Top Products
1 SETTING UP WIRELESS NETWORK
16 Setting Up the Infrastructure Mode
Specify SSID
When you select the Infrastructure Mode for the network type, you can specify the SSID by selecting the available network
list or manually entering the SSID.
P.16 “Selecting the SSID from the available network list”
P.17 “Entering the SSID manually”
If you are not sure how the SSID must be specified, see the following section to determine the SSID.
P.11 “Determine the SSID”
Selecting the SSID from the available network list
This equipment can search the available SSID automatically from the wireless network. Then you can select the SSID
from the list.
1
Press [AVAILABLE NETWORK].
The AVAILABLE NETWORK screen is displayed.
2
Select the SSID that this equipment will connect and press [OK].
The screen returns to the SSID SETTINGS screen.
y The available network may not be displayed according to the communication environmental conditions.
y If the desired SSID is not displayed, please specify the SSID manually.
P.17 “Entering the SSID manually”
y This Wireless LAN supports only channel 1 to 11. This equipment cannot connect the Access Point that
uses the other channel than these channels. Please make sure to set the channel between 1 to 11 in the
Access Point.