Filter
Top Products
1.SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 21
1 SETTING UP WIRELESS NETWORK
6
Specify the following items and press [NEXT].
y ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access Point and this equipment.
[TKIP] — Select this to use TKIP encryption. TKIP provides a different key for per packet with a message integrity
check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. AES is the next-generation cryptography algorithm that the
U.S. government improves to replace the DES and 3DES.
[DYNAMIC WEP] — Select this to use an encryption which automatically updates the WEP key. DYNAMIC WEP
does so periodically as well as automatically.
To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X].
The encryption intensity between each encryption is:
AES(CCMP) > TKIP > DYNAMIC WEP
7
Specify the following items and press [NEXT].
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].