Filter
Top Products
1 SETTING UP WIRELESS NETWORK
30 Setting Up the Infrastructure Mode
Selecting no security mode
You can also set no security for wireless access.
If you do not set no security, anyone knows how the SSID can connect to the wireless network. Therefore, it is
recommended to set the security if it is possible.
1
Press [NONE] and press [NEXT].
The TRANSMIT POWER SETTINGS screen is displayed.
2
Specify the following items and press [NEXT].
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
3
Confirm the settings and press [FINISH].
If you want to change the settings, press [PREV] to move back to the screen that you want to change and then
repeat the operation.