Filter
Top Products
1 SETTING UP WIRELESS NETWORK
24 Setting Up the Infrastructure Mode
3
Enter the following items and press [NEXT].
y [EAP USER NAME]
Press this to enter the EAP user name that is used for the authentication.
In the EAP USER NAME, enter the user name in “User Name@FQDN” format.
Example: wlanuser@example.com
y [EAP PASSWORD]
Press this to enter the EAP password that is used for the authentication.
y [RETYPE PASS]
Press this to enter the EAP password again that you enter in the EAP PASSWORD field.
When pressing each button, the letter entry screen is displayed. Enter the value using the keyboard and digital
keys, and press [OK] to set the entry.
4
Specify the following items and press [NEXT].
y ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access Point and this equipment.
[TKIP] — Select this to use TKIP encryption. TKIP provides a different key for per packet with a message integrity
check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. AES is the next-generation cryptography algorithm that the
U.S. government improves to replace the DES and 3DES.
[DYNAMIC WEP] — Select this to use an encryption which automatically updates the WEP key. DYNAMIC WEP
does so periodically as well as automatically.
To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X].
The encryption intensity between each encryption is:
AES(CCMP) > TKIP > DYNAMIC WEP