Toshiba GN-1060 Network Card User Manual


 
1.SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 23
1 SETTING UP WIRELESS NETWORK
Selecting WPA/WPA2/802.1X security mode with PEAP protocol
Using the WPA/WPA2/802.1X with the PEAP protocol, you must install the CA certification file in the equipment. This
equipment uses the user name and password to authenticate the access rights to the wireless network, and the RADIUS
server authenticate this equipment using the CA certification file.
When using the WPA/WPA2/802.1X with the PEAP protocol, you must install the CA certification file in the equipment
using TopAccess first. For instructions on how to install the CA certification using TopAccess, refer to TopAccess
Guide.
1
Press [WPA], [WPA2] or [802.1X], and then [NEXT].
The AUTHENTICATION SETTINGS screen is displayed.
To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X].
2
Press [PEAP] and press [NEXT].
The WIRELESS AUTHENTICATION (PEAP) screen is displayed.