Filter
Top Products
7
1
CAMERA terminal Connects to the camera head.
2
POWER switch Turns on and off the camera control unit.
3
POWER indicator Lights up when the power is turned on.
4
AGC switch Selects the gain mode. (AGC OFF/AGC ON/SENS UP)
5
WB switch Selects the white balance mode. (MANU/SET/AUTO)
6
White balance adjust control Adjusts the R gain and B gain with the white balance
mode set to MANU by the WB switch
5
.
7
FUNC button Determines the setting indication contents when the set-
ting menu is displayed on the screen.
8
UP button Selects the setting item when the setting menu is dis-
played on the screen. (When the WB switch
5
is set to
SET, pressing the UP button for more than 2 sec. acti-
vates the white balance SET operation.)
9
DOWN button Selects the setting item when the setting menu is dis-
played on the screen.
p
DC IN 12V terminal Accepts a DC power supply (12V).
q
EXT SYNC terminal Accepts an external sync signal to synchronize the cam-
era output signal with external signal.
w
S-VIDEO terminal Connects terminal to S input terminal of a monitor or a
VCR, etc.
Can be used at the same time as video terminal.
e
VIDEO terminal Connects terminal to video input terminal of a monitor
or a VCR, etc.
Can be used at the same time with the S-VIDEO termi-
nal.
r
REMOTE terminal Controls the functions via RS232C.
t
FUNC LOCK switch Locks the switches and control on the front panel. When
the FUNC LOCK switch is set to ON, all settings except
for the POWER switch
2
and the file item of the screen
setting menu are locked out.
y
IRIS terminal Connect when using an automatic iris lens.