Filter
Top Products
User’s Manual 4-4
Basic Operations
Settings
You can enable or disable the following settings:
AutoRun Mode
Region Select Utility starts automatically when you start up the operating
system.
Open the Dialing Properties dialog box after selecting
region
The dialing properties dialog box will be displayed automatically after you
select the region.
Location list for region selection
A submenu appears displaying location information for telephony.
Open dialog box, if the modem and Telephony Current
Location region code do not match
A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialling properties.
Connecting
To connect the internal modem cable, follow the steps below.
If you are using the computer in Japan, technical regulations described in
the Telecommunications Business Law require that you select Japan
region mode. It is illegal to use the modem in Japan with any other
selection.
■ In case of a lightning storm, unplug the modem cable from the
telephone jack.
■ Do not connect the modem to a digital telephone line. A digital line will
damage the modem.