Toshiba L517 Personal Computer User Manual


 
4.15LCDModule 4ReplacementProcedures
Satellite/SatelliteProL510/L515/L517
MaintenanceManual 4-51
InstallingtheLCDModule
NOTE:LCD/FLcablemustbecarefullypeeledawaybeforedisconnectingitfromthe
module.
InstalltheLCDmoduleaccordingtothefollowingproceduresandFigures4-33,4-34.
1. TurntheLCDupsidedown.
2. ConnecttheLCD/FLcabletotheLCDmoduleconnector.
3. TurntheLCDrightsideup.
4. PlacetheLCDbracketinthecorrectpositionandsecureitwithtwoM2x3blackflat
headscrewsoneachside.
5. PleasetheLCDmoduleinthecorrectpositionandsecureitwithtwoM2.5x5black
flatheatscrewsoneachside.
CAUTION:WheninstallingtheLCDmodule,pleasefollowbelowinstruction:
WhenpluginLCD/FLcableintoLCDmoduleconnector,needtoplughorizontally.For
Sharppanel,ifLCD/FLcableconnectorisnotpluggedhorizontally,itmaybedamaged.