Filter
Top Products
6-2 User’s Manual
L630/L635
System Indicators
The Battery, DC IN and Power indicators on the system indicator panel
alert you to the computer’s operating capability and battery charge status.
Battery Indicator
Check the Battery indicator to determine the status of the battery pack -
the following indicator conditions should be noted:
Power on
Power off (no operation)
AC adaptor not
connected
Battery charge is
above low battery
trigger point
• Operates
• LED: Battery off
DC IN off
Battery charge is
below low battery
trigger point
• Operates
• LED: Battery
blinking amber
DC IN off
Battery charge is
exhausted
Computer goes into
Hibernation or shuts down
(depending on the
TOSHIBA power
Management Utility Setting)
No battery installed • No operation
•LED: Battery off
DC IN off
Blinking amber
Indicates battery charge is below low battery
trigger point.
Amber Indicates the AC adaptor is connected and
charging the battery.
White
Indicates the AC adaptor is connected and the
battery is fully charged.
No light
Under any other conditions, the indicator does not
light.
If the battery becomes too hot while it is being charged, the charge will
stop and the battery indicator will go out. When the battery’s temperature
falls to a normal range, charge will resume. This event occurs regardless
of whether the power to the computer is on or off.