Filter
Top Products
User’s Manual 8-9
L630/L635
BD Combo Drive
For more information, refer to Chapter 4, Operating Basics.
Problem Procedure
You cannot access a
CD/DVD/BD in the
drive
Make sure the drive’s drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the CD/DVD/BD
is properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the CD, DVD, or BD. Make
sure there is no obstruction. Remove any foreign
object.
Check whether the CD/DVD/BD is dirty. If it is,
wipe it with a cleaning cloth dipped in water or a
neutral cleaner. See the Media Care section in
Chapter 4, for details on cleaning.
Some CD/DVD/BDs
run correctly, but
others do not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the CD/DVD/BD’s documentation.
Check the type of CD/DVD/BD you are using.
Refer to Chapter 3, Hardware, Utilities and
Options, for more information.
Check the region code on the CD/DVD/BD. It
must match that on the drive. Region codes are
listed in the Optical Disc Drive section in
Chapter 2, The Grand Tour.
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
■
Use only media recommended by TOSHIBA
■ Do not use the mouse or keyboard during writing.
■ Use only the software supplied with the computer
for recording.
■ Do not run or start other software during writing.
■ Do not jar the computer during writing.
■ Do not connect/disconnect external devices or
install/remove internal cards during writing.
If problems persist, contact your dealer.