Toshiba MA-1450-1 SERIES Cash Register User Manual


 
6. PROGRAMMING OPERATIONS
EO1-11095
6-15
NOTES: 1. The “Address Nos” designation at the top after “4 [@/FOR]” can be skipped if not necessary. If
entered, the designated Address (es) will automatically be accessed after the PLU Code
designation.
2. A maximum of 1100 PLUs are programmable (varies depending on the allocation of the RAM).
The “[PLU]” key here indicates the key labeled simply as “PLU” but not any PLU Preset-code
Keys.
3. When the Address No. is sequential from the preceding address (if the Address Designation
feature has not been used), the Address No. and the following [ST] can be omitted.
4. The programming contents of each address are further described in the PLU TABLE
PROGRAMMING CONTENTS below.
PLU TABLE PROGRAMMING CONTENTS
6.8 PLU TABLE PROGRAMMING (Submode 4)
-- Continued on next page --
1 to 60
Address No. Description of Programming Contents
1 Linked Department Code
Enter the 2-digit code of the department to which the PLU is linked. When the PLU is newly
programmed, this entry is compulsory (an error will result if this entry is skipped.)
| | | [#]
2 PLU Name (Descriptor)
Enter a maximum of 16 regular-sized or 8 double-sized characters. See the CHARACTER
ENTRIES at the beginning of this chapter. End with [ST].
When no name is programmed for a PLU, the following will be the auto-program name for
printing:
PLUxxxxxx (PLU Code 6 digits)
3 Preset Price
For a preset PLU (preset-price PLU, enter a maximum of 6-digit price, and depress [#].
1 to 999999 (result: $0,01 to $9999,99)
When the option “Preset Point for one decimal digit allowed” is selected, the decimal digit
can be entered after entering a maximum of 5 integer digits and the [•] key
1 to 99999 (result: $0,01 to $999,99) or 0,1 to 99999,9 (result: $0,001 to $999,999)
A zero-price ($0,00) may be preset by entering 0 in the above operation.
When no numerics are entered and the [#] key is simply depressed, the PLU will be an
open PLU (open-price PLU).
4 Status Selection
Enter the Status Codes 2 to 7 whose status must be set to ON side. More than one code
may be entered. Enter 0 when none of the statuses should be set to ON.
Status Item Selective Status
Code OFF ON
1 -- vacant --
2 Net to S.I. 1? No Yes
3 Net to S.I. 2? No Yes
4 Food Stamp (or GST) Status? No Yes
5 -- vacant --
6 HI-CONE Status? No Yes
7 Lock or Unlock? Unlock (in use) Lock (not in use)