11. JOURNAL AND RECEIPT PAPER-END DETECTOR
EO1-11095
11-1
11. JOURNAL AND RECEIPT PAPER-END DETECTOR
11. JOURNAL AND RECEIPT PAPER-END DETECTOR
(1) This detects when either the journal or receipt paper is coming near the end. It is provided in order to
prompt the operator to replace the old paper roll with a new one.
(2) When the paper roll comes near the end (or the paper has not been set properly), no key operation will be
accepted and the AMOUNT portion of the display will keep flickering.
(3) When a new paper roll is set, only the [RF] and [JF] keys are allowed to operate. Next, when the [C] key is
depressed, the display flickering will be cleared and normal key-in operations will be accepted. If any
printing was suspended, it will continue printing.
(4) If this detector senses a paper-end condition during printing, the printing will stop after the current line
printing is completed.
(5) If the [C] key is depressed in the paper-end condition, it will be ignored. The [C] key depression will be
effective to clear the display flickering only after the new paper roll is set.
(For further details, refer to Chapter 15.)